Why would someone use Dursan® in their HPLC column and equipment flow paths? Let's discuss the benefits of using a CVD coated flow path for solving HPLC test problems.
PEEK, stainless steel, and titanium all are used in high performance liquid chromatography (HPLC) flow paths, either in sample transfer, filtration or in the column themselves. All are good materials but they can have limitations.
Surface reactivity and material durability can hamper HPLC test performance and reliability.
In this blog post you will learn: How Dursan® coated surfaces can improve HPLC test results
|
Dursan coated stainless steel flow paths and columns can dramatically improve the inertness of stainless steel while maintaining a robust system at a cost that's significantly cheaper then titanium. Dursan® is a thin flexible CVD coating that can penetrate and line all areas of the HPLC flow path including:
Because Dursan is inert, the coating won't negatively impact the performance of test molecules and will improve the performance of compounds like:
Let's discuss comparative test results and learn more about the performance of CVD coated flow paths in HPLC applications. For more information about our metal free performance coating technology get our presentation or watch our webinar.
Chelating agents like tetracycline
The comparative chromatograph below tells the story. The resolution quality of tetracycline on a stainless steel column showed poor peak shape and response. The Dursan® coated column significantly improved the peak shape and significantly improved response.
Dursan prevents chelating groups from binding to metal sites. This can be a significant issue for high surface area components like sintered metal frits. Let's compare the peak shape performance of coated and uncoated frits and columns for chelating applications.
Parameters for the test were:
We injected the solution onto several coated and uncoated columns to compare peaks and overall performance. Materials were grouped into 4 tests, A, B, C, and D outlined below.
The Dursan® coated surfaces improved peak resolution and peak shape significantly as compared below.
Group A: SS Frit & Column |
B: Dursan Frit & Column |
C: Dursan Frit, SS Column |
D: TI Frit, SS Column |
Proteins
Comparative studies with Abbott Laboratories demonstrated the non stick feature of Dursan. Through our collaborative study with Abbott Laboratories, Dursan was shown to prevent non-specific protein binding and minimize protein fouling. Studies highlighting separations on HPLC peptide standard mixture, ribonuclease, cytochrome C, bovine serum albumin, and proteins show better response and minimum retention of the analyte on the surface, preventing cross contamination.
QCM-D analysis of coated and uncoated stainless steel surfaces show significant increase in protein mass on the stainless steel surface. The Dursan coated surface does not retain proteins, showing no increase in mass after washing with a non-ionic surfactant. This demonstrates the non stick feature of the coating.
Want to learn more about our protein study? Read the complete whitepaper.
Organic Molecules
Organic molecules like phosphates can perform poorly in stainless steel flow paths. We compared the performance of phosphate interaction in stainless and Dursan coated systems. Results show a significant improvement in performance.
Packing Efficiency
Does the application of Dursan® to columns and frits have an effect on packing efficiency or flow? We compared coated and uncoated columns and found comparable packing efficiency.
Column type |
Efficiency (avg of 3) |
Asym (avg) of 3 |
Stainless Steel |
15195 plates |
1.028 |
Dursan coated frit and column |
15233 plates |
1.026 |
With Dursan coated frit, SS column |
15069 plates |
1.020 |
Titanium frit SS column |
14263 plates |
1.044 |
Comparison of plates show there are negligible effects on pressure and column packability. Why is packability not effected by the coating? Because the coating process results in a micron thick surface on larger geometries like columns. And on fine geometries, like frits, the coating process results in a 100 nm thick surface. The super thin but durable coating has a minimal impact on overall volume and efficiency.
In a previous blog post we discussed the question: Is Dursan resistant to TFA in HPLC testing applications. Read that post here to learn more about how the coating performs.
Get more information on how our coatings perform in HPLC applications.
Our Technical Service Team is here to help you select the best coating for your application.
Our team can:
Want more in-depth information about our coatings and learn how they improve the performance of products and processes in challenging applications?