SilcoTek Coating Blog

Subscribe for weekly updates on how SilcoTek’s coatings create a better world

Process Analytical June 04 2021

Reliable Emissions Monitoring and Subpart Ja Flare Sampling

Learn how SilcoNert coated sample paths can improve emissions monitoring of Sulfur, SO2, H2S and VOC detection in refinery, process, stack, CEM, and flare sampling systems. Reliable Emissions...

sulfur analysis February 07 2020

The Impact of Trace Sulfur on Mercury Analysis

A recent paper published in ACS Energy Fuels discusses the link between the quality of mercury analysis and exposure to trace sulfur compounds in natural gas analysis.   The Impact of Trace Sulfur on...

sulfur analysis January 03 2020

Tips for Improved Natural Gas Sampling

The quality of natural gas testing results are only as good as the method, tools and training.  We discuss some helpful tips and sampling guidelines. Tips for Improved Natural Gas Sampling...

Corrosion November 22 2019

Tips on How to Improve Aluminum Galvanic Corrosion Resistance

Galvanic corrosion can can selectively destroy critical components.  That's why prudent materials management is critical.  Sometimes material selection options are limited.  That's where silicon...

Process Analytical October 18 2019

What is the Thermal Performance of Silicon Coatings?

How do silicon coatings perform in high temperature and what is the thermal conductivity of silicon coatings?  We turn up the heat on our coatings to see how they perform. What is the Thermal...

Oil & Gas Upstream & Downstream October 12 2018

Solving Process Sampling Problems

We take an in-depth look into solving process sampling problems by focusing on the 3 Ms of sampling.  What are the 3 Ms you ask?  OK I'll tell you what the 3 Ms are straight away and save you the...

Oil & Gas Upstream & Downstream May 18 2018

How to Prevent Coking and Fouling in Refinery Applications

Can SilcoTek coatings prevent fouling and coking in refinery applications?  Read on and get some pretty impressive results! In this blog you will learn: How fouling impacts refineries Problems with...

Oil & Gas Upstream & Downstream May 12 2017

How To Get The Most Out Of Refinery Flare Sampling Systems

  Refinery, flare & stack sampling can be a difficult and sometimes maddening task.  Long calibration times, loss of sample, and inaccurate sampling can all lead to premature gray hair.  The leading...

sulfur analysis November 23 2016

Is This The End Of Tier III?

The US election and change in Presidential Administration will most likely bring about unprecedented change in US regulatory statutes.  Your guess is as good as mine as to how far regulatory change...